#infosec Troubleshooting #Syspeace and why source IP addresses aren’t always resolved by #Windowsserver in eventid 4625

Syspeace is a HIPS (Host Intrusion Prevention System) that monitors failed logins attempts on for instance Remote Desktop Servers, Exchange Server, SQL Servers, Winlogon events on Windows Servers from Windows Server 2003 and more and blocks, tracks and reports the attacker based on customazible rules

Sometimes though, the event (Eventid 4625 or eventid 529 and a few other security events we monitor) doesn’t actually contain the source IP address thus leaving Syspeace with nothing to block.
If there’s no IP address to block, it can’t be put into to the Windows Frewall Syspeace rules and the bruteforce attack can continue.

This essentially happens when you switch from RDP layer security to using a certificate.

An article on Stackoverflow might be pointing to a solution though


Essentially, the suggestion is to change this setting in the Local Security Policy of the server running Syspeace.

Computer ConfigurationWindows SettingsSecurity SettingsSecurity Options

– Network security: LAN Manager authentication level — Send NTLMv2 response only. Refuse LM & NTLM
– Network security: Restrict NTLM: Audit Incoming NTLM Traffic — Enable auditing for all accounts
– Network security: Restrict NTLM: Incoming NTLM traffic — Deny all accounts

Here’s a warning though!
If you’re using the RD WEB also to publish Remote Resources.
For some reason , your MAC OS clients will stop recieving Remote Resources since it seems to run on NTLM version 1 (and I would guess Android and XP too )
Also scanners may stop working locally if they need to write files to a newtorks share
I tried a lab with this and when seting the – Network security: Restrict NTLM: Incoming NTLM traffic — Deny all accounts , the remote resources can’t be refreshed.

There are a few warnings when changing this setting and you should investigate if there are applications or services in your server environment that are dependent on LM or NTLM (v1).

I’ve changed the setting on a number of servers and haven’t seen anything stop working but still you should investigate before changing.

Syspeace - intrusion prevention for Windows servers
Syspeace website

Troubleshooting Syspeace

An interesting support case came to our attention recently.

A customer claimed that Syspeace wouldn’t block according to the rules.

The bruteforce attacks would continue , even after they should have been blocked.

We checked the ususal culprits (verify that the .Net is fully patched, that the customer is running the latest Syspeace version, verify that logging is enabled and that the firewall is turned on )

The rules were added as expected in the firewall but they didn’t have any effect.

After a lot of troubleshooting the root-cause was found.

The customers server did indeed have the firewall enabled but only in one of the firewall profiles (public, private, domain) and unfortuantely, the network used was not the one the firewall was enabled for, hence, nothing was blocked as expected. The rules were added but did not take effect in the expected amount of time

So, as a general troubleshooting tip , check how your firewall is enabled and verify that it indeed is the correct network profile in there, or, enable the firewall for all three profiles.

The usual troubleshooting tips we give are described in the manual in the troubleshooting section

1. Make sure you’ve enabled the firewall (as described in Firewall), firewall enabled, prefferably on all profiles.

2. Make sure you’ve enabled the auditing (as described in Windows login detection prerequisites).

3. Verify that the server can reach https://s.syspeace.com/ping . (You should see a message saying Hello from Stockholm. and the local time of the server and recommended Syspeace version)

4. In some instances, when running Terminal Server or Remote Desktop Services there’s actually the scenario where the Windows server itself fails to obtain the source IP address of the login attempt (you can verify this by checking the Windows event log and look for Source Network Address: ) Sometimes, that entry is empty, thus disabling Syspeace from actually having anything to block. Syspeace will attempt to corroborate the IP address from some other logs. If it doesn’t find any, there is not much that Syspeace can do.

5. In any applicable firewall or antivirus software, allow Syspeace access to https://s.syspeace.com/ (port 443).

6. Verify any proxy settings, if applicable.

7. Some methods of Windows authentication actually attempts to log in several times. Two failures may be part of one log in attempt. Syspeace has no way of knowing how many attempts were intended and has to work with the actual failures. Due to counting failures instead of attempts, rules may be triggered seemingly ahead of time.

8. One way of quickly verifying functionality is to use a workstation (not whitelisted) and attack your server with the net use command from the command prompt. After the number of tries defined in the current rules, the workstation should be blocked from communicating with the server. Example of the command: net use * \server name or server IP addressanyshare /user:syspeacetester ”anypassword”

9. If you want to submit logs to us, start Syspeace, go to Management → System settings, enable logging and start the service. The log file is created in a subfolder of the Syspeace installation folder.

10. When submitting logs,
Please create a .zip file of the logfiles, include any relevant information from Windows Eventlogs (application, system and security and when applicapble, the Syspeace eventlog ) and also create a .Zip-file of the database and email them directly to the devteam . The email address can be found in the manual

11. If your server doesn’t pick up the source IP address in your eventlog , please have a look a this blog article

12. If your database has grown above the size limit of 4 GB, in the current version ( 2.5.2) you will have to manually delete the database and set up your Syspeace again. in the upcoming version this has been fixed.

by Juha Jurvanen

#msexchange Brute force attacks prevention on #Webmail #OWA with #Syspeace #hacking #security

Syspeace icon
Syspeace icon

Preventing brute force attacks against Microsoft Exchange Server and OWA Webmail

If you’re running Microsoft Exchange Server your also quite likely to have the Microsoft Exchange OWA (Webmail)
interface up & running to enable your users to use Activesync and access their email, calendars and contacts
over an easy-to-use web interface accessible over the Internet. This is just as relevant if you’re managing your
own Exchange Server or if it is a hosted Exchange at a service provider. If your provider doesn’t have a
solution for this, you may find yourself in a very difficult situation one day as explained further down.
Since the Exchange Webmail (OWA) is reachable and visible over the Internet, this of course also means that
anyone is able to try to log in to your Exchange server over the same OWA interface. They may not succeed to
login but they may try to overload your server by sending lots of login request or have your users undergo a
Denial of Service attack (a DoS attack).

Brute force attacks used as Denial of Service attacks

The OWA in itself (or does Windows Server for that matter) doesn’t have any brute force prevention mechanisms
built into it but the actual user validation is done within the Active Directory infrastructure by your domain
controller(s). Within the Microsoft line of products this is actually true for most of them such as Terminal
Server (RDS, Remote Desktop), Sharepoint, SQL Server and so on and also for Citrix since user validation is done
in the same way.
If you have for instance set up Account Lockout Policies to disable a user account after 5 failed attempts ,
anyone with knowledge of your name standards (email addrees, AD login) can basically run a script against the
server using a specicif username (or hundreds of them) and deliberatley usoing wrong passwords, thus locking the
legitimate users account and disabling them from loging in at all (in essence, they can’t even login to anything
that uses the Active Directory validation, not even their own workstations in the Office)
If such an attack is made from a single IP address, it is fairly easy to block it manually (simply block the
attack in either the external firewall or the local firewall of the Exchange server).
In reality though, this is not how such an attack occurs. Should someone really want to disrupt ypur services,
they will do this from hundreds or thousands computers at the same time and making it impossible to block

Using Syspeace as a countermeasure

With Syspeace , this is all taken care of automatically. Syspeace monitors the Windows Serevr logs for failed
login requests and if an IP address tries to login against your servers ( Exchange, Terminals Server and so on)
and fails for instance 5 times within half an hour, the IP address is automatically blocked from communicating
at all with the affected server on any level (so if you’re also running other services , they will not be able
to target them either once blocked).
Each attack is blocked, traced and reported via email that contains the source IP address, the username used,
country of origin and previous attacks from the same IP address.

Here is actually an example of how the email notification looks like (with IP address and domain name intentionally removed)
Blocked address *.*.*.* (ip-*-*-*-*.*.secureserver.net) [United States] 2015-01-14 18:45:00 Rule used (Winlogon):
Name: Catch All Login
Trigger window: 4.00:30:00
Occurrences: 5
Lockout time: 02:00:00
Previous observations of this IP address:
2015-01-14 16:44:50 ****lab
2015-01-14 16:44:52 ****labroator
2015-01-14 12:53:44 ****ron
2015-01-14 12:53:46 ****demo
2015-01-14 12:53:48 ****canon

Syspeace also delivers daily and weekly reports of blocked threats.

Within Syspeace, there is also reporting tools for access reports, a Global Blacklist for infamous offenders and
much more.

Installing and setting ups Syspeace

Setting up Syspeace is very easy and only takes a couple of minutes, without the need for changing your
infrastructure or bying very expensive dedicated hardware. Most likely , you will not even need to hire a
consultant for it.

Syspeace runs as Windows Service and support a variety of Windows Servers such as Terminal Server, Exchange Server, Sharepointm Windows Serevr 2003 to Windows Serevr 2012 R2 and more and it starts detecting brute force attacks immediately after you set it up and press the start button.

Please download a free, fully functional 30 trial from http://www.syspeace.com/free-download/download-plus-
and see for yourself how a very big problem can be very easily solved.
Should you decide to keep using Syspeace, the licensing cost is equivalent to an antivirus product and the
licensing model is highly flexible, enabling you to decide for yourself ofor how long you wish to run Syspeace.

Syspeace - intrusion prevention for Windows servers
Syspeace website

#infosec How to block an ongoing dictionary attack / brute force attack against Windows Servers, #MSexchange and more

Syspeace - intrusion prevention for Windows servers

Syspeace website

How to block an intrusion attack against Windows Servers for free

If your server or datacenter is targeted by a brute force attack a.k.a dicttionary attacks , it might be hard to figure out how to quickly make it stop.
If the attack is from a single IP address you’d probably block it in your external firewall or the Windows Server firewall and after that start tracking and reporting the attack to see if needs following up.
However, if the attacks is triggered from hundreds or even thousands of IP addresses, it will become basically impossible to block all of them in the firewall so you need something to help you automate the task.

This is where Syspeace comes into play.

Fully functional, free trial for bruteforce prevention

Since Syspeace has a fully functional trial for 30 days, you can simply download it here ,install, regsiter with  a valid mail address, enter the licensekey into the Syspeace GUI and the attack will be automatically handled (blocked, tracked and reported) as soon as the Syspeace service starts up.

In essence, the attack will be blocked within minutes from even connecting to your server.

The entire process of downloading, installing and registering ususally only takes a few minutes and since Syspeace is a Windows service it will also automatically start if the server is rebooted.

If the attack is triggered to use just a few login attempts per attacking IP address and for a longer period of time in between attempts, I’d suggest you change te default rule to monitor for failed logins for a longer triggerwindow , for example 4 days so you’d also automatically detect hacking attempts that are trying to stay under the radar for countermeasure such as Syspeace.

The Syspeace Global BlackList

Since Syspeace has already blocked over 3.6 Million attacks worldwide , we’ve also got a Global Blacklist that is automatically downloaded to all other Syspeace clients.

This means that if an IP address has been deemed a repeat offender (meaning that it has attacked X number of Syspeace customers and Y number of servers within Z amount of tme), the attackers IP address is quite likely to already be in the GBL and therefore it will be automatically blacklisted on all Syspeace-installations, thus making it preemptively blocked.

Syspeace does not simmply disable the login for the attacker, it completely blocks the attacker on all ports from communicating with your server so if you’ve got otther services also running on the server (such as an FTP or SQL Server) the attacker will not be able to reach any if those services either. The lockdown is on all TCP ports.

More Syspeace features, supported Windows Server editions and other services such as Exchange Server, Terminal Server, SQL Server …

You will also get tracking and reporting included immediately for future reference or forensics.
Syspeace supports Windows Server editions from Windows 2003 and upwards, including the Small Business Server editions. It also supports Terminal Server (RDS) and RemoteAPP and RDWeb, Microsoft Exchange Serevr including the webmail (OWA) , Citrix, Sharepoint,
SQL Server and we’ve also released public APIs to use with various weblogins. All of this is included in Syspeace. Out of the box.
We’ve got a IIS FTP server detector in beta and also a FileZilla FTP Server detector and we’re constantly developing new detectors for various server software.

Download and try out Syspeace completely free

Even if you’re not being attacked by a large brute force attack right now, you can still download the trial and have Syspeace handle attacks for you in the background. Who knows, there could be more invalid login attemtpts than you think, such as disabled or removed users that have left the company or very subtle, slow dictioanry attacks going on in the background that actaully might be quite tricky to spot if your not  constantly monitoring logfles.

On this blog, http://syspeace.wordpress.com ,we’ve written a lot of blog articles on how Syspeace works and a lot of other articles regarding securing your servers that we hope you’ll find useful.

How to battle slowgrind #bruteforce attacks against #msexchange #windows server #remotedesktop #sharepoint with #Syspeace

Syspeace automatically blocks attacks that occur according to the rules.
The default rule is that if an intruder fails to login more than 5 times within 30 minutes, the intruders IP address is blocked, tracked and reported for 2 hours and simply is denied any access to the server.

A new trend though has emerged and that is for bruteforce attackers to ”slowgrind” through servers, trying to stay ”under the radar” really from IDS/IPS HIPS/HIDS such as Syspeace.
They’ve got thousands and thousands of computers at their disposal so they’ll basically just try a few times at each server and then move on to next one in the IP range or geographical location hoping not to trigger any alarms or hacker countermeasures in place.

An easy way to battle this is actually simply to change the default rule in Syspeace from the time windows of 30 minutes to for example 5 days.

This way , I’m pretty sure you’ll see there are quite a few attackers that only tried 2 or three times a couple of days ago and they’re back again but still only trying only a few times.

With the ”5 day” windows, you’ll catch and block those attacks too.

Here’s actually a brilliant example of an attack blocked, using a 4 day window.

Blocked address [China] 2014-08-11 15:06:00
Rule used (Winlogon):
        Name:                   Catch All Login
        Trigger window:         4.00:30:00
        Occurrences:            5
        Lockout time:           02:00:00
        Previous observations of this IP address:
        2014-08-11 13:05:51     aksabadministrator
        2014-08-10 22:06:48     aksabadministrator
        2014-08-10 06:39:12     aksabadministrator
        2014-08-09 15:39:52     aksabadministrator
        2014-08-09 00:32:05     aksabadministrator

Syspeace has blocked more than 3 285 300 intrusion attempts against Windows Servers worldwide so far.

Syspeace - intrusion prevention for Windows servers
Syspeace website

#infosec #Syspeace for intrusion prevention for #windowsserver instead of specific applications or services such as #FileZilla FTP Server or #WordPress

Syspeace - intrusion prevention for Windows servers
Syspeace website

Syspeace for intrusion prevention for the entire server instead of specific applications or services such as FileZilla Server

If you’re managing a server and host various applications and services all of them are reachable for your users and and customers but most likely, and quite often, they’re also reachable for others to try to log in.

To be costeffective, you could be using using a Terminal Server (or Remote desktop Server) and you’ve also got for instance a FileZilla FTP Server to ease file transfers (or the Microsoft IIS FTP server, my hunch is that these two are the most common ones if you’re running a Windows Server environment) and there’s a web interface for the remote applications and so on . There might also be other services on the same server/servers.

Built in intrusion prevention in applications or Windows Server

Some software actually have brute force prevention built into them, such as the FileZilla FTP Server (although, keep in mind that is it not enabled by default) and there could be other software installed that have intrusion prevention built into them. Not within Windows Server though and there are quite a few articles on this blog explaining how it works such as this one about securing your Exchange OWA

An atacker will first portscan your server, search for open ports and try to figure out what services and applications you’re running on them. Even if you’ve changed the default ports, quite often the application will actually reveal itself in the header what it is and what version it is.

You can for instance simply do a telnet session to the port in question and see what your applications actually reveal about themselves.
Simply start a telnet client and connect to the port you’re interested in such as port 25 for SMTP (email) or port 21 for FTP and you’d probably get at least some information on what is running on the server. To gather more detailed and complex information, you probably be using software like nmap.

After that, tbey’ll simply use automated scripts to try and login. If there is a block in some way on for instance FileZilla FTP Server they’ll simply move on to the next port/service , like the RDWeb interface for Remote Desktop and RemoteAPP services and continue the attack since they’d only been blocked on the FTP level so far (usually port 21) Here’s a >previous article describing parts of the anatomy in a hacking attack written by Juha Jurvanen.

If you’re hosting a multiple software and srevices on a server and each of them have brute force prevention builtin , they’ll only block the attack within their own part of the system.
FileZilla will block the brute force on FTP but nothing else.

Using Syspeace as your HIPS , Host intrusion Prevention System for Windows Servers

A key difference using Syspeace as a HIPS (Host Intrusion Prevention System) is that it will block the attacker entirely on all ports if they trigger any of the detectors, rendering the attacker unable to communicate at all with your server on any port (even ping), thus automatically protecting any other service you have running on it.

To illustrate this with something in the ”real” world.
If you’ve got a house with multiple doors, the attacker would first try their keycard/key in one of the doors to try to gain access into the house until an alarm is triggered and they would have to move on, but only for that specific door.
After that they’d keep using the keycard/key on the next door and so on.
With Syspeace, they’d only be able to use the keycard on the first door until the alarm is triggered and after that they would be automatically blocked from even trying to use the keycard on any of the other doors since the doors would have ”magically” disappeared for them and would be out of reach for them. It would be as if the actual building itself would have disappeared for them.

Download a fully functional, free Syspeace trial for intrusion prevention or even if you’re under attack of a brute force or dictionary attack

Have a look at the Syspeace website and try the fully functional trial for it and see how it can help you to easily and quickly brute force protect your server. We’ve had users downnloading Syspeace and implementing it in minutes during a dictionary attack to have Syspeace automatically deal with it and to block, trace and report the attack. Since the trial is fully functional and free and it only takes a few minutes to set it up, it can be an easy solution to handle an ongoing attack.

Sysoeace supports Windows Server 2003 and on (including the Windows Server Small Business versions), SQL Server, Remote Desktop, Exchange Server, Sharepoint, Exchange OWA, RDWeb , Citrix and more. Out of the box. It actually also support Windows 7 and Windows 8 but please refer to his article on when Syspeace is actually useful for you and when it’s not.

Syspeace has blocked more than 3 126 500 brute force and dictionary attackas targetaed agains Windows Servers worldwide.

The Syspeace team has also developed a FileZilla FTP Detector that is in beta and also an Microsoft IIS FTP detector.
We’ve also released a detector for selfhosted WordPress and we’ve released the Syspeace API for .PHP and .NET to enable our users to develop their own intrusion prevention for applications instead of being forced to develop protection into applications themselves from scratch.
The Syspeace API can also be used to protect spcific websites if you’re hostng multiple websites.

#infosec #cloudsecurity #Syspeace – Host Intrusion Prevention Software on an external #Windowsserver #VPS in the #Cloud #IaaS #PaaS

Syspeace – Host Intrusion Prevention Software on an external Windows Server VPS in the Cloud


Syspeace - intrusion prevention for Windows servers
Syspeace – intrusion prevention for Windows servers

There are many variations of IaaS / PaaS / Cloud services.
Some are public clouds and some are hybrids and some are private.
There’s also the possibility rent an external VPS and use as a server at quite a few providers nowadays.

The IaaS/PaaS (Infrastracture as a Service/ Platform as a Service) provider gives you acces to a virtual server designed as to your needs when it comes to RAM and storage. Basically, it’s usually an empty server with an operating system.

Running IT solutions on an external VPS decreases the need for hardware investements but there are still things you need to consider and you need to manage your server the same way you would with any physical server i terms of monitoring security and tha availability of services and applications.

Logically, the server is reachable from the Internet which will make it a target.
Anything that is reachable will be targeted for intrusion attempts. The responsibility for Iaas/PaaS provider is simply to provide you with the Hypervisor needed to host you operating system and the rest is up to you. You install the applications, webservers and everything just as you would with a normal physical server.

Some aware Iaas/PaaS/Cloud service provders do have some kind of Appshop/Control panel where you can get preconfigured software such as an antivirus or even Syspeace for intrusion prevention but it’s not that common.

Remember that your VPS shares ”IP-space” with other customers when it comes to the network at your provider and you have absolutely no idea of what your ”neighbors” are doing and if they’re the slightest security aware.
They may hve been hacked without you knowing it (or them either for that matter) and they could have the IP address right next to you and their server could be used for instance for portscanning or hacking attempts against your VPS (if seen this quite a few times now).

Your IaaS/PaaS provider usually wouldn’t know since it’s not their responsibility. Their role is simply to provide you and their other customers with a VPS. Nothing more. No security monitoring, no antivirus, no application / services monitoring
In case of a larger DDoS attack, they probobaly have ways to handle them if it concerns their entire network and affects a lot of their customers but when it comes to attacks speciafically targetet at your VPS and your users on it, it’s a bit trickier.

Imagine the scenario you’ve set up a server, you got your users set up, installed your applications and services and it’s up and running. Now, rermember that there’s no connection nbetween you userdatabase and login mechanisms locally on the VPS and your IaaS/PaaS systems so they’ll actually never even get any alarms if some is trying to brute force your server or your webapplication. They will be alerted in case of a large DDoS attack against their entire netowrk but they will not be alerted in cases of a bruteforce attack targetetd against your VPS.
So, in short, it’s all up to you. There’s no differnce apart from your not running the server in your own datacenter or at a hosting company.

Protecting your Windows Server, Exchange, Terminal Server / RDS, Sharepoint, SQL Server, Citrix and more from intrusion attempts

If your running a Windows server as a VPS you need to set up Syspeace to automatically handle intrusion attempts and have them blocked, tracked and reported againts the Syspeace Global Blacklist.
You also need to secure the server in other ways such as an antivirus, have your services monitored, you webapplication login form secured both from malicios code and from brute force logins (this is also wher Syspeace comes into play since there are plugins available for various webplatforms to use against bruteforce attacks)

Syspeace is an automated Host Intrusion Prevention System (also called a HIPS) and is targeted to protect Windows servers, Exchange and OWA , Sharepoint, Terminal Server / RDS and the RDWEB login, Citrix , SQL Server and more from bruteforce / dictionary attacks. . It is easy to install, and easy to manage and you’ll set it up in a couple of minutes and you’re protected. Instantly.

As I’m writing this, Syspeace has succesfully blocked, tracked and reported over 2 921 200 (2.9 Million) brute force and dictionary attacks against Windows servers worldwide.

Have a look the Syspeace website for a free trial download or keep reading some of the previous articles I’ve written on various securiy aspects on server managagement such as Using various brute force and dictionary attack prevention methods to prevent hackers – and why they don’t work and Securing your #WinServ and #MSExchange with an acceptable baseline security

By Juha Jurvanen @ JufCorp